AirLive WT-2000R Guía de usuario descargar pdf (Pagina 37)

Connect On-Demand – Only connect when you want to

surf the Internet. “Close if idle for xx minutes” is set to

stop the connection when the network traffic is not

sending or receiving after an idle time.

TCP MSS Option The TCP MSS Option enables the configuration of the

maximum segment size (MSS) for transient packets that

traverse a router, specifically TCP segments in the SYN

bit set, when PPPoE is being used in the network. Please

specify the MSS range from 100 to 1452 bytes or 0 byte

as the default value.

Parameter Description

Get IP Address Choose Static or Dynamic IP Address. If Static IP is

selected, please set the IP Address, Subnet Mask and

Gateway obtained from your ISP.

Static IP Address Enter the IP Address assigned by your ISP.

IP Subnet Mask Enter the Subnet Mask assigned by your ISP.

Gateway Enter the Gateway assigned by your ISP.

NAT NAT (Network Address Translation), an Internet standard

that enables a local-area network (LAN) to use one set of

IP addresses for internal traffic and a second set of

addresses for external traffic. When NAT is enabled, the

router will help to make all necessary IP address

translations for the PC connected to the router to access

the Internet.

Default Route When “Default Router” is enabled, all the packets for

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 80 81

Sin comentarios

AirLive WT-2000R Guía de usuario Pagina 37