AirLive WT-2000R Guía de usuario descargar pdf (Pagina 40)

Only” or “OUT Only”.

Multicast Specify the method of transmitting data simultaneously to

many receivers. Please select “IGMP v1” or “IGMP v2”

as the multicast protocol or select “Disabled” to disable

the function.

z DHCP

Parameter Description

DHCP You can enable or disable the DHCP server. By enabling

the DHCP server the router will automatically give your

LAN clients an IP address. If the DHCP is not enabled

then you’ll have to manually set your LAN client’s IP

addresses.

Starting IP Address If the DHCP Server is enabled, please set the “Starting

IP Address” which will be the first IP Address assigned to

the LAN client. By default, the “Starting IP Address” is

192.168.2.100.

IP Pool Count You can select a particular IP address range for your

DHCP server to issue IP addresses to your LAN Clients.

By default, the “IP Pool Count” is 100. The IP range is

starting from IP 192.168.2.100 to 192.168.2.199.

Parameter Description

Lease Time In the Lease Time setting you can specify the time period

that the DHCP Server lends an IP address to your LAN

clients. The DHCP will change your LAN client’s IP

address when this time threshold period is terminated.

DNS Relay A Domain Name System (DNS) server is like an index of

IP addresses and Web addresses. If you type a Web

address into your browser, such as “www.router.com”, a

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 80 81

Sin comentarios

AirLive WT-2000R Guía de usuario Pagina 40