AirLive WT-2000R Guía de usuario descargar pdf (Pagina 44)

uses TKIP for data encryption. When “WPA-PSK” is

selected, please enter 8-64 characters as the “Pre-

Shared Key”.

WPA2-PSK WPA2-PSK is also for home and small business. The

difference between WPA-PSK and WPA2-PSK is that

WPA2-PSK provides data encryption via the AES. In

contrast, WPA-PSK uses Temporal Key Integrity Protocol

(TKIP). WPA2-PSK offers the highest level of security

available. When “WPA2-PSK” is selected, please enter

8-64 characters as the “Pre-Shared Key”.

z Advanced Setting

Parameter Description

Beacon Interval The interval of time that this wireless router broadcast a

beacon. Beacon is used to synchronize the wireless

network. The range for the beacon period is between 20

and 1000 with a typical value of 100 (milliseconds).

RTS/CTS Threshold When the packet size is smaller than the RTS threshold,

the wireless router will not use the RTS/CTS mechanism

to send this packet. The range is from 1500 to 2347.

Fragmentation

Threshold

Fragment Threshold specifies the maximum size of

packet during the fragmentation of data to be transmitted.

If you set this value too low, it will result in bad

performance. Enter a value from 256 to 2346.

DTIM Determines the interval the Access Point will send its

broadcast traffic. The range is from 1 to 255 and the

default value is 3 beacons.

Parameter Description

802.11b/g

802.11 b – This router will only work in 802.11b mode. If

there are only 802.11b wireless clients in the network,

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 80 81

Sin comentarios

AirLive WT-2000R Guía de usuario Pagina 44