AirLive WT-2000R Guía de usuario descargar pdf (Pagina 71)

6. Troubleshooting

1. The LAN LED on the front panel does not light up.

STEPS CORRECTIVE ACTION

1 Check the Ethernet cable connections between your ADSL2+

Router and the computer or hub.

2 Check for faulty Ethernet cables.

3 Make sure your computer’s Ethernet card is working properly.

4 If these steps fail to correct the problem, contact your local

distributor for assistance.

2. The ADSL LED on the front panel does not light up.

STEPS CORRECTIVE ACTION

1 Check the telephone wire and connections between ADSL2+

Router DSL port and the wall jack.

2 Make sure that the telephone company has checked your phone

line and set it up for DSL service.

3 Reset your ADSL line to reinitialize your link to the DSLAM.

4 If these steps fail to correct the problem, contact your local

distributor for assistance.

3. I cannot access the web management.

STEPS CORRECTIVE ACTION

1 Make sure you are using the correct IP address of ADSL2+

Router. Check the IP address of ADSL2+ Router.

2 Your computer and ADSL2+ Router’s IP addresses must be on

the same subnet for LAN access.

3 If you changed ADSL2+ Router’s LAN IP address, then enter the

new one as the URL.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 80 81

Sin comentarios

AirLive WT-2000R Guía de usuario Pagina 71